Core4 runs on the Teratronik V4 series controllers V4 and V4½. Both boards are based on
an ARM9 core running at 200MHz.
Common features |
Software Support |
- ARM9 based microcontroller, 200MHz
- MMC/SDCard socket
- TFT Display interface up to 640x480 pixels at 24bit color depth, up to 800x600 pixels at 16bit color
depth
- Resistive 4-wire touch screen interface
- 10/100MBit Ethernet
- Two USB host ports
- One USB device port
- AC97 Audio codec
- Battery and goldcap backed realtime clock
|
|
Additional features of V4
|
Additional features of V4½ with power board V4½-pwr1
|
V4 Hardware datasheet (pdf)
- 128 MByte SDRAM 100MHz
- 2 MByte Battery Backed Memory
- 4 MByte Nor Dataflash
- 64 MByte Nand Flash
- Power Input 15V...30V DC
- Five RS232 ports (Two with full modem control, Three with RTS/CTS only.)
- MDB connector (Industry standard coin changer and bill validator interface.)
- Teratronik µBus port (Drives external Relay and Input/Output interfaces.)
- Drives two industry standard alphanumeric LCD displays
- Digital IO port (5 x TTL out, 4 x TTL in, 5 Volts)
- LED Port (6 x LED output)
- Versatile Card Reader Port
- I²C port, 5 Volts
- Audio connector with 1W mono speaker driver, microphone in, stereo line-in, line-out and call-button
input
|
V4½-cpu processor board datasheet (pdf)
V4½-pwr1 power board hardware datasheet (pdf)
- 64 MByte SDRAM 100MHz
- 2 MByte Battery Backed Memory
- 4 MByte Nor Dataflash
- 64 MByte Nand Flash
- Power Input 15V...30V DC
- Provides 12V and 5V
- Button cell holder for 3V Lithium CR2032
- ttyS0: RS232 Debug port
- ttyS1: RS485 full duplex, optoisolated
- ttyS2: Current Loop or RS232
- ttyS3: RS232
- ttyS4: RS232
- ttyS5: RS232
- Seven NPN Transistor drivers (ULN2003)
- 4 x 4 Keypad matrix connector
- Two isolated optocoupler inputs
- Tamper switch input
- I²C port, 5 Volts
- Audio connector with 1W mono speaker driver, microphone in and call-button input
|